CSS Encryption Explained for DVD Manufacturing
October 12, 2009 by Brian G Fisher
One of the biggest mysteries that we have to explain to many of our new clients is how to get CSS(content scramble system) encryption applied to a DVD project.
When a client wants to have copy protection on a DVD that we manufacture, the easiest way to have that done is to have CSS encryption applied to their DVD. However, this process is more complex than most understand, and I am hoping to dispel most of the misconceptions that are made when trying to get CSS applied to your DVD master.
Misconception 1: AUTHORING – During authoring you will have to have the CSS Encryption Flag set. One of the biggest mistakes DVD Authorers make is that they check the CSS Flag and assume that copy protection will be applied to the DVD. This is only the case if the master that is being output is either a DLT master, or a DDP master. If you intend to apply CSS to a master that is a playable DVDR, the CSS flag will not be set. In short, this means that if you do not have access to a DLT drive or cannot output a DDP master, your DVD will not be encrypted.
Misconception 2: The actual CSS scrambling is done at the factory. When a DLT or DDP master coming in with the CSS check flag set, during glass mastering, the replicator applies the CSS algorithm to the DVD project. Another common misunderstanding is that since CSS is applied at the factory, many clients want to turn in a playable DVD-R master without CSS flag set and ask if we can apply the CSS at that point. This is not technologically possible. The master must have the CSS Flag set for us to apply it at glass mastering. We can take your playable DVDR master and remaster to DDP to apply the CSS, but this is an extra cost of $300-$450 depending on the master DVD-5 or DVD-9.
Misconception 3: Replicators – Many replicators, especially those overseas do not pay the CSS royalty fees for CSS, and therefore do not have the technology to apply the CSS encryption to your DVD project. A good way to find out if your replicator is offering legitimate CSS encryption is to ask them if they pay the CSS royalty and that you want an Eclipse report showing that CSS is verified on the master. If you want CSS, you may have to stick with a domestic manufacturer in the US. Most US DVD manufacturers offer CSS, however, some of the smaller outfits may not.
In short, if you want CSS applied to your DVD, you need to do your homework,……get linked up with a good credible replicator who can help you through these steps to make sure you get the copy protection you want on your DVD project.
If you have more questions regarding CSS Encryption please give us a call at 888-889-2926, call me direct, ask for Brian or you can email me at briangfisher@dvdduplication.net.
Dual Layer Burnables
October 11, 2009 by Brian G Fisher
DVD Duplication.net has continued to add capacity for Dual layer burnables. Early on in the dual layer life cycle we were very hesitant to offer dual layer burnable services, ie DVD-DL Duplication. However, as the technology matured and the life cycle progressed, we have become more and more comfortable with the reliability of the burnable dual layer DVDs. This is not to be confused with DVD-9 which is Replication. DVD-9 is a dual layer replicated disc that normally start at 1000 units and are entirely robust and reliable. They are the typical Hollywood movie DVDs that you rent.
In the past the lower volume burnables, however, have been known to have quality issues, which is why we did not offer that service or promote dual layer DVD Duplication. We do see the technology maturing now to the point where we can comfortably offer a dual layer duplication service with a good quality guarantee. These orders are still taken with a caveat, that there may be some compatibility issues with some players. These discs themselves, though burn well and the data is guaranteed to be intact.
If you need more information about Dual Layer discs, just give us a call or write.
Ask for Amy or Brian.
Top Tips for Manufacturing your DVD
August 4, 2009 by Brian G Fisher
There are two main tips for making sure that your DVD Duplication or Replication project goes off without a hitch.
1. Artwork prep, artwork prep, …artwork prep. This is the number one issue that will slow down a DVD project. Take the time to plan ahead and read our artwork specifications and use the proper templates. Back and forth on artwork corrections is the number one thing that will slow down the production of your DVD project. We do everything we can on our end to help adjust artwork to minimize problems, however, there are circumstances where we cannot make adjustments to your artwork to get it to fit our specs. Sending your artwork back for you to re-do will delay a project by at minimum of one day, so plan ahead.
2. If you are new to DVD authoring, plan to spend at least 3 times as much time as you think it will take to finish your DVD master. DVD authoring is not as simple as hitting a button and making a DVD master. Usually most clients who are new to DVD authoring find that there is a long period of trial and error before the actual DVD works the way they envisioned. Video Quality vs. Compression parameters, menu creation and authoring and system crashes seem to be the big three problems here. Plan ahead so you have you master ready to go.
Always remember that time is money in manufacturing. We can offer more reasonable prices at longer lead times, but as art or master problems arise, we will have to shorten our lead times to make your delivery date. Those shortened lead times come with rush fees and premium prices to make up for the quick turns.
If you need more information about dvd manufacturing services just take a look at our services tab or call us at 1-888-889-2926. Ask for Brian or Amy
DVD Duplication Still Strong over Blu-ray Duplication
June 29, 2009 by Brian G Fisher
DVD Duplication and Replication is still the optical medium of choice for most filmmakers and video professionals. Although Blu-ray Disc has been making inroads, it is still cost prohibitive for most smaller Video and Film professionals.
Most Blu-ray Duplication is currently done for special use, screening and captive audience forums where high def is proffered. However, widespread adoption of home players will be a requirement before we believe that film and video developers will show signs of adoption.
For more information on our Manufacturing services you can contact us at 1-866-210-8767. Ask for Brian or Amy.
DVD Duplication and Replication Video Blog
January 14, 2009 by Brian G Fisher
Welcome to our DVD Duplication and Replication Video Blog!
